ACCESSORIES
BELTS
MAGAZINES
TRAINING
WATCHES
AIRSOFT
ACCESSORIES
AIRSOFT WEAPONS
BBs
LOAD BEARING VESTS
APPAREL
NOMEX
PANTS
SHIRTS
SHORTS
EYEWEAR
GLASSES
GOGGLES
FLASHLIGHT/ WEAPON LIGHTS
ACCESSORIES
FLASHLIGHTS
WEAPON LIGHTS
FOOTWEAR
FOOTWEAR
GEAR BAGS/ CASES
GEAR BAGS
HARD CASES
HOLSTERS/ SLINGS
HARNESSES
HOLSTERS
SLINGS
KNIVES/TOOLS
KNIVES
SHARPENING
TOOLS
LAW ENFORCEMENT
ACCESSORIES
ARMOR
BATONS
HANDCUFFS
OPTICS
OPTICS
PADS/ HYDRATION
ACCESSORIES
ASSAULT
HYDRATION
POCKETS/ POUCHES
POCKETS
POUCHES
PROTECTIVE GEAR
ARMOR
GLOVES
PADS
TACTICAL VESTS
ARMOR
LOAD BEARING VESTS
FORCE PROTECTION PRODUCTS
BULLET PROOF ACCESSORIES
ROAD SPIKES
PLATES AND HELMETS |
|
Gear Bags |
 |
Blackhawk 3-Day Assault Pack
This
uniquely designed pack is a mid-sized frameless back pack.
It has a padded back, padded contour shoulder straps with
detachable sternum strap, and padded removable waist belt.
The inside back has a pouch to fit an optional HydraStorm
Hydration System with an elastic covered grommet Tube
Routing System® (TRS) to feed the drink tube out the top and
over either shoulder. This feature allows the user to
efficiently carry 2 Liters of any hot or cold liquid and
drink on the move. The pack has a main compartment, smaller
cargo pouch and cargo pocket. This 3-Day pack also comes
with sleeping bag straps.
-
Padded shoulder straps with D-rings for
equipment attachment
-
Detachable,
elasticized sternum strap with silent release buckle
-
Compartments are closed by YKK zipper and sliders with
silent pulls
-
Optional
HydraStorm Hydration System
-
Made of
1000 denier NyTaneon nylon
-
Dual side
detachable padded waist belt
-
Drag/carry handle
Dimensions: 6 x 13 x 20
Cubes: 2,240
Wt: 2 lbs 9 oz. |
 |
5.11 Mission Ready Bag
FEATURES:
30” wide x 20” deep x 13” tall
1680 denier nylon
Integrated wheels
Imported
Available Sizes: One Size - Color – Black |
 |
5.11 Range Ready Bag
FEATURES:
24” wide x 16” deep x 10” tall
600 denier nylon
Removable ammo tote w/ brass bag
Imported, One Size, Black |
 |
Blackhawk ALERT Bag
The A.L.E.R.T.
(Assault Load-Out Emergency Response Transport ) Bag is the
ultimate in complete ROLLING gear storage, organization and
transportation.
All compartments closed by #9 YKK zipper and sliders with
our new Silent Zip / Grip Pulls.
Four large clear vinyl compartments for identification (two
on top and one on each end.)
Eight large internal see through MESH zippered compartments,
five are expandable.
One internal pouch is completely padded for sensitive gear
(not mesh), explosives, magazines, etc.
Full wrap around carry handles made of heavy duty webbing
for superior weight support.
Carry handles on each end are vertically attached for
maximum strength.
Hook & loop closing "handle grabber" secures the handles
together.
Sick of back problems from lugging your gear bags? This is
the answer! The BlackHawk A.L.E.R.T. Operator Bag has:
Fully accessible hinge type lid,
Highest quality in-line skate wheels on one end,
Hide away extension handle at the other end
The bottom has an internal rigid steel frame stiffeners for
efficient carry and rolling! The bottom will not droop or
bend under heavy loads when rolling and on the move.
Made with 2 layers of our rugged NyTaneon® 1000D Nylon
material. |
 |
Blackhawk Divers Travel Bag
The Diver's
Travel Bag is an outstanding multi-use bag with superior
workmanship. It features concealable padded back pack
straps, separate fin pockets and padded outside equipment
pockets. The bag opens completely for easy organization and
packing.
*New wider handle grabber for more comfortable carry
*Hide away padded back pack straps
*Made of 1000 Denier Nytaneon nylon
*3/8" closed cell foam
*#9 YKK zipper and dual sliders
*Wrap around carry handles for outstanding weight support
Dimensions: 16 x 11 x 26.5 inches
Wt: 9 lbs |
|
Cases |
 |
Travel Vault II-Solid Foam Insert w/ wheels
Pelican 1700 Protector travel case. Unbreakable, watertight,
dustproof, chemical resistant and corrosion proof. These are
some of the features of this Pelican Protector Case™ that
offers total protection for your equipment. It is made of
Ultra High Impact structural copolymer that makes it strong
and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and
ABS latches seal perfectly and includes an automatic purge
valve for quick equalization after changes in atmospheric
pressure.
It has transport wheels for better handling. Your equipment
can fit into the high density foam of the case for total
subjection and protection against impact, vibration or
shock. A nameplate (included) can be engraved.
This case is NATO codified and tested to MIL C-4150J
(Military Standard), IP-67 (Ingress Protection). You break
it, Pelican replaces it -- forever.
Temperature rating -10° F to +210° F
Inside dimensions 35-3/4" x 13-13/16" x 5-1/4"
Outside dimensions 38-1/8" x 17-13/16" x 6-1/8"
Lid Depth 1-3/4"
Case Depth 3.5"
Floats in salt water with 50 lb load
Integrated rollers and handles
Available in Black |
 |
Travel Vault 42”-Solid Foam Insert w/ wheels
This is the Pelican 1720 Protector travel case. It is nearly
identical to the 1700 case, but is longer and slightly
wider. This facilitates longer rifles and/or capacity for
additional accessories.
Unbreakable, watertight, dustproof, chemical resistant and
corrosion proof. These are some of the features of this
Pelican Protector Case™ that offers total protection for
your equipment. It is made of Ultra High Impact structural
copolymer that makes it strong and durable. Its exclusive
1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly
and includes an automatic purge valve for quick equalization
after changes in atmospheric pressure.
It has transport wheels for better handling. Your equipment
can fit into the high density foam of the case for total
subjection and protection against impact, vibration or
shock. A nameplate (included) can be engraved.
This case is NATO codified and tested to MIL C-4150J
(Military Standard), IP-67 (Ingress Protection). You break
it, Pelican replaces it -- forever.
Temperature rating -10° F to +210° F
Inside dimensions 42" x 13-1/2 x 5-4/16"
Outside dimensions 44-3/8" x 16" x 6-1/8"
Lid Depth 1-3/4"
Case Depth 3.5"
Floats in salt water with 55 lb load
Integrated rollers and handles
Available in Black |
 |
Travel Vault-Solid Foam Insert w/ wheels
This is the Pelican 1750 Protector travel case. It is nearly
identical to the 1700 case, but is longer and slightly
wider. This facilitates longer rifles and/or capacity for
additional accessories.
Unbreakable, watertight, dustproof, chemical resistant and
corrosion proof. These are some of the features of this
Pelican Protector Case™ that offers total protection for
your equipment. It is made of Ultra High Impact structural
copolymer that makes it strong and durable. Its exclusive
1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly
and includes an automatic purge valve for quick equalization
after changes in atmospheric pressure.
It has transport wheels for better handling. Your equipment
can fit into the high density foam of the case for total
subjection and protection against impact, vibration or
shock. A nameplate (included) can be engraved.
This case is NATO codified and tested to MIL C-4150J
(Military Standard), IP-67 (Ingress Protection). You break
it, Pelican replaces it -- forever.
Temperature rating -10° F to +210° F
Inside dimensions 50-1/2" x 13-7/16" x 5-1/4"
Outside dimensions 53" x 17-7/16" x 6-1/16"
Lid Depth 1-3/4"
Case Depth 3.5"
Floats in salt water with 55 lb load
Integrated rollers and handles
Available in Black |
 |
Travel Vault II-Solid Foam Insert w/ wheels
Pelican 1700 Protector travel case. Unbreakable, watertight,
dustproof, chemical resistant and corrosion proof. These are
some of the features of this Pelican Protector Case™ that
offers total protection for your equipment. It is made of
Ultra High Impact structural copolymer that makes it strong
and durable. Its exclusive 1/4" (6.4 mm) neoprene o-ring and
ABS latches seal perfectly and includes an automatic purge
valve for quick equalization after changes in atmospheric
pressure.
It has transport wheels for better handling. Your equipment
can fit into the high density foam of the case for total
subjection and protection against impact, vibration or
shock. A nameplate (included) can be engraved.
This case is NATO codified and tested to MIL C-4150J
(Military Standard), IP-67 (Ingress Protection). You break
it, Pelican replaces it -- forever.
Temperature rating -10° F to +210° F
Inside dimensions 35-3/4" x 13-13/16" x 5-1/4"
Outside dimensions 38-1/8" x 17-13/16" x 6-1/8"
Lid Depth 1-3/4"
Case Depth 3.5"
Floats in salt water with 50 lb load
Integrated rollers and handles
Available in Black |
 |
Travel Vault-Solid Foam Insert
w/ wheels
This is the
Pelican 1750 Protector travel case. It is nearly identical
to the 1700 case, but is longer and slightly wider. This
facilitates longer rifles and/or capacity for additional
accessories.
Unbreakable, watertight, dustproof, chemical resistant and
corrosion proof. These are some of the features of this
Pelican Protector Case™ that offers total protection for
your equipment. It is made of Ultra High Impact structural
copolymer that makes it strong and durable. Its exclusive
1/4" (6.4 mm) neoprene o-ring and ABS latches seal perfectly
and includes an automatic purge valve for quick equalization
after changes in atmospheric pressure.
It has transport wheels for better handling. Your equipment
can fit into the high density foam of the case for total
subjection and protection against impact, vibration or
shock. A nameplate (included) can be engraved.
This case is NATO codified and tested to MIL C-4150J
(Military Standard), IP-67 (Ingress Protection). You break
it, Pelican replaces it -- forever.
Temperature rating -10° F to +210° F
Inside dimensions 50-1/2" x 13-7/16" x 5-1/4"
Outside dimensions 53" x 17-7/16" x 6-1/16"
Lid Depth 1-3/4"
Case Depth 3.5"
Floats in salt water with 55 lb load
Integrated rollers and handles
Available in Black |
< < R e
t u r n T o T o p |